/* This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
 *
 * \brief  XMEGA TWI master driver header file.
 *
 *      This file contains the function prototypes and enumerator definitions
 *      for various configuration parameters for the XMEGA TWI master driver.
 *
 *      The driver is not intended for size and/or speed critical code, since
 *      most functions are just a few lines of code, and the function call
 *      overhead would decrease code performance. The driver is intended for
 *      rapid prototyping and documentation purposes for getting started with
 *      the XMEGA TWI master module.
 *
 *      For size and/or speed critical code, it is recommended to copy the
 *      function contents directly into your application instead of making
 *      a function call.
 *
 * \par Application note:
 *      AVR1308: Using the XMEGA TWI
 *
 * \par Documentation
 *      For comprehensive code documentation, supported compilers, compiler
 *      settings and supported devices see readme.html
 *
 * \author
 *      Atmel Corporation: http://www.atmel.com \n
 *      Support email: avr@atmel.com
 *
 * $Revision: 1569 $
 * $Date: 2008-04-22 13:03:43 +0200 (ti, 22 apr 2008) $  \n
 *
 * Copyright (c) 2008, Atmel Corporation All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * 3. The name of ATMEL may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
 * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/
#ifndef TWI_MASTER_DRIVER_H
#define TWI_MASTER_DRIVER_H

#include "avr_compiler.h"

/*! Baud register setting calculation. Formula described in datasheet. */
#define TWI_BAUD(F_SYS, F_TWI) ((F_SYS / (2 * F_TWI)) - 5)


/*! Transaction status defines. */
#define TWIM_STATUS_READY              0
#define TWIM_STATUS_BUSY               1


/*! Transaction result enumeration. */
typedef enum TWIM_RESULT_enum {
	TWIM_RESULT_UNKNOWN          ,
	TWIM_RESULT_OK               ,
	TWIM_RESULT_BUFFER_OVERFLOW  ,
	TWIM_RESULT_ARBITRATION_LOST ,
	TWIM_RESULT_BUS_ERROR        ,
	TWIM_RESULT_NACK_RECEIVED    ,
	TWIM_RESULT_FAIL             ,
} TWIM_RESULT_t;

/*! \brief TWI master driver struct
 *
 *  TWI master struct. Holds pointer to TWI module,
 *  buffers and necessary varibles.
 */
typedef struct TWI_Master {
	TWI_t *interface;         /*!< Pointer to what interface to use */
	uint8_t const *writeData; /*!< Data to write */
	uint8_t *readData;        /*!< Read data */
	uint8_t address;      /*!< Slave address */
	uint8_t bytesToWrite; /*!< Number of bytes to write */
	uint8_t bytesToRead;  /*!< Number of bytes to read */
	uint8_t bytesWritten; /*!< Number of bytes written */
	uint8_t bytesRead;    /*!< Number of bytes read */
	uint8_t status;       /*!< Status of transaction */
	uint8_t result;       /*!< Result of transaction */
}TWI_Master_t;

void TWI_MasterInit(TWI_Master_t *twi,
                    TWI_t *module,
                    TWI_MASTER_INTLVL_t intLevel,
                    uint8_t baudRateRegisterSetting);

TWI_MASTER_BUSSTATE_t TWI_MasterState(TWI_Master_t *twi);

bool TWI_MasterReady(TWI_Master_t *twi);

void TWI_MasterForceIdle(TWI_Master_t *twi);

bool TWI_MasterWrite(TWI_Master_t *twi,
                     uint8_t address,
                     uint8_t const * writeData,
                     uint8_t bytesToWrite);

bool TWI_MasterRead(TWI_Master_t *twi,
                    uint8_t address,
		    uint8_t * readData,
                    uint8_t bytesToRead);

bool TWI_MasterWriteRead(TWI_Master_t *twi,
                         uint8_t address,
                         uint8_t const *writeData,
                         uint8_t bytesToWrite,
			 uint8_t *readData,
                         uint8_t bytesToRead);

void TWI_MasterInterruptHandler(TWI_Master_t *twi);


/*! TWI master interrupt service routine.
 *
 *  Interrupt service routine for the TWI master. Copy the needed vectors
 *  into your code.
 *
    ISR(TWIC_TWIM_vect)
    {
      TWI_MasterInterruptHandler(&twiMaster);
    }

 *
 */

#endif /* TWI_MASTER_DRIVER_H */